Search This Blog

Wikipedia

Search results

Saturday, November 2, 2013

Lockheed SR-71 Blackbird

From Wikipedia, the free encyclopedia


SR-71 "Blackbird"
Dryden's SR-71B Blackbird, NASA 831, slices across the snow-covered southern Sierra Nevada Mountains of California after being refueled by an Air Force tanker during a 1994 flight. SR-71B was the trainer version of the SR-71. The dual cockpit to allow the instructor to fly. Note the streaks of fuel from refueling spillage.
An SR-71B trainer over the Sierra Nevada Mountains of California in 1994. The raised second cockpit is for the instructor.
Role Strategic reconnaissance aircraft
Manufacturer Lockheed, Skunk Works division
Designer Clarence "Kelly" Johnson
First flight 22 December 1964
Introduction 1966
Retired 1998
Status Retired
Primary users United States Air Force
NASA
Number built 32
Developed from Lockheed A-12
The Lockheed SR-71 "Blackbird" was an advanced, long-range, Mach 3+ strategic reconnaissance aircraft.[1] It was developed as a black project from the Lockheed A-12 reconnaissance aircraft in the 1960s by Lockheed and its Skunk Works division. Clarence "Kelly" Johnson was responsible for many of the design's innovative concepts. During reconnaissance missions, the SR-71 operated at high speeds and altitudes to allow it to outrace threats. If a surface-to-air missile launch was detected, the standard evasive action was simply to accelerate and outfly the missile.[2]
The SR-71 served with the U.S. Air Force from 1964 to 1998. A total of 32 aircraft were built; 12 were lost in accidents, but none lost to enemy action.[3][4] The SR-71 has been given several nicknames, including Blackbird and Habu.[5] Since 1976, it has held the world record for the fastest air-breathing manned aircraft, a record previously held by the YF-12.[6][7][8]

Development

Background

Lockheed's previous reconnaissance aircraft was the relatively slow U-2, designed for the Central Intelligence Agency (CIA). The 1960 downing of Francis Gary Powers's U-2 underscored the aircraft's vulnerability and the need for faster reconnaissance aircraft. The CIA turned again to Kelly Johnson and Lockheed's Skunk Works, who developed the A-12[9] and would go on to build upon its design concepts for the SR-71.
The A-12 first flew at Groom Lake (Area 51), Nevada, on 25 April 1962. Thirteen were built; two variants were also developed, including three YF-12A interceptor prototypes, and two M-21 drone carrier variants. The aircraft was meant to be powered by the Pratt & Whitney J58 engine, but development ran over schedule, and it was equipped instead with the less powerful Pratt & Whitney J75. The J58s were retrofitted as they became available, and became the standard powerplant for all subsequent aircraft in the series (A-12, YF-12, M-21) as well as the SR-71. The A-12 flew missions over Vietnam and North Korea before its retirement in 1968. The program's cancellation was announced on 28 December 1966,[10] due both to budget concerns[11] and because of the forthcoming SR-71.

SR-71

Blackbird on the assembly line at Lockheed Skunk Works
A-12 production on what would later become the Blackbird assembly line at Skunk Works
The SR-71 designator is a continuation of the pre-1962 bomber series; the last aircraft built using the series was the XB-70 Valkyrie; however, a bomber variant of the Blackbird was briefly given the B-71 designator, which was retained when the type was changed to SR-71.[12]
During the later period of its testing, the B-70 was proposed for a reconnaissance/strike role, with an RS-70 designation. When it was clear that the A-12 performance potential was much greater, the Air Force ordered a variant of the A-12 in December 1962.[13] Originally named R-12[N 1] by Lockheed, the Air Force version was longer and heavier than the A-12, with a longer fuselage to hold more fuel, two seats in the cockpit, and reshaped chines. Reconnaissance equipment included signals intelligence sensors, a side-looking radar and a photo camera.[13] The CIA's A-12 was a better photo reconnaissance platform than the Air Force's R-12, since the A-12 flew somewhat higher and faster,[11] and with only one pilot it had room to carry a superior camera[11] and more instruments.[14]
During the 1964 campaign, Republican presidential nominee Barry Goldwater repeatedly criticized President Lyndon B. Johnson and his administration for falling behind the Soviet Union in developing new weapons. Johnson decided to counter this criticism by revealing the existence of the YF-12A Air Force interceptor, which also served as cover for the still-secret A-12,[15] and the Air Force reconnaissance model since July 1964. Air Force Chief of Staff General Curtis LeMay preferred the SR (Strategic Reconnaissance) designation and wanted the RS-71 to be named SR-71. Before the July speech, LeMay lobbied to modify Johnson's speech to read SR-71 instead of RS-71. The media transcript given to the press at the time still had the earlier RS-71 designation in places, creating the story that the president had misread the aircraft's designation.[16][N 2]
In 1968, Secretary of Defense Robert McNamara canceled the F-12 interceptor program; the specialized tooling used to manufacture both the YF-12 and the SR-71 was also ordered destroyed.[17] Production of the SR-71 totaled 32 aircraft with 29 SR-71As, 2 SR-71Bs, and the single SR-71C.[18]

Design

The Blackbird's cockpit
The flight instrumentation of the SR-71
The SR-71 was designed for flight at over Mach 3 with a flight crew of two in tandem cockpits, with the pilot in the forward cockpit and the Reconnaissance Systems Officer (RSO) monitoring the surveillance systems and equipment from the behind cockpit.[19] The SR-71 was designed to minimize its radar cross-section, an early attempt at stealth design.[20] Finished aircraft were painted a dark blue, almost black, to increase the emission of internal heat and to act as camouflage against the night sky. The dark color led to the aircraft's call sign "Blackbird".

Airframe

On most aircraft, use of titanium was limited by the costs involved in procurement and manufacture. It was generally used only in components exposed to the highest temperatures, such as exhaust fairings and the leading edges of wings. On the SR-71, titanium was used for 85% of the structure, with much of the rest polymer composite materials.[21] To control costs, Lockheed used a more easily worked alloy of titanium which softened at a lower temperature.[N 3]
The challenges posed by the SR-71 led Lockheed to develop entirely new fabrication methods to enable its manufacture, and have since been used in the manufacture of many other aircraft. Welding the titanium requires distilled water, as the chlorine present in tap water is corrosive; commonplace cadmium-plated tools could not be used as they also caused corrosion.[22] Metallurgical contamination was another problem; at one point 80% of the delivered titanium for manufacture was rejected on these grounds.[23][24]
A Lockheed M-21 with D-21 drone on top
A Lockheed M-21 with D-21 drone on top
The high temperatures generated during flight required special design and operating techniques. For example, major portions of the skin of the inboard wings were corrugated, not smooth. (Aerodynamicists initially opposed the concept and accused the design engineers of trying to make a Mach 3 variant of the 1920s-era Ford Trimotor, known for its corrugated aluminum skin.[25]) The heat of flight would have caused a smooth skin to split or curl, but the corrugated skin could expand vertically and horizontally. The corrugation also increased longitudinal strength. Similarly, the fuselage panels were manufactured to fit only loosely on the ground. Proper alignment was achieved only when the airframe heated up and expanded several inches. Because of this, and the lack of a fuel sealing system that could handle the thermal expansion of the airframe at extreme temperatures, the aircraft would leak JP-7 jet fuel on the runway. At the beginning of each mission, the aircraft would make a short sprint after takeoff to warm up the airframe, then refuel before heading off to its destination.
Cooling was carried out by cycling fuel behind the titanium surfaces in the chines. On landing, the canopy temperature was over 300 °C (572 °F).[25] The red stripes on some SR-71s were to prevent maintenance workers from damaging the skin.

Stealth and threat avoidance

Water vapor is condensed by the low-pressure vortices generated by the chines outboard of each engine inlet.
The first operational aircraft designed around a stealthy shape and materials, the SR-71 had several features designed to reduce its radar signature. The SR-71 had a radar cross section (RCS) of around 10 square meters,[26] much greater than the later Lockheed F-117 Nighthawk, which had an RCS equivalent in size to a ball bearing.[27] Drawing on the first studies in radar stealth technology, which indicated that a shape with flattened, tapering sides would reflect most radar energy away from the radar beams' place of origin, engineers added chines and canted the vertical control surfaces inward. Special radar-absorbing materials were incorporated into sawtooth-shaped sections of the aircraft's skin. Cesium-based substances were added to the fuel to somewhat reduce the visibility of the exhaust plumes to radar, although the large and hot exhaust stream produced at speed remained quite apparent. For all this effort, Kelly Johnson later conceded that Soviet radar technology advanced faster than the stealth technology employed against it.[28]
The SR-71 carried electronic countermeasures, but its greatest protection was its high speed and cruising altitude that made it almost invulnerable to the weapons of its day. Merely accelerating would typically be enough to evade a surface-to-air missile,[2] and the plane was faster than the Soviet Union's principal interceptor, the MiG-25.[29] In its service life, no SR-71 was shot down,[3]

Chines

Head-on view of an A-12 on the deck of the Intrepid Sea-Air-Space Museum
The SR-71 featured chines, a pair of sharp edges leading aft from either side of the nose along the fuselage. These were not a feature on the early A-3 design; Dr. Frank Rodgers of the Scientific Engineering Institute, a CIA front organization, had discovered that a cross-section of a sphere had a greatly reduced radar reflection, and adapted a cylindrical-shaped fuselage by stretching out the sides of the fuselage.[30] After the advisory panel provisionally selected Convair's FISH design over the A-3 on the basis of RCS, Lockheed adopted chines for its A-4 through A-6 designs.[31]
Aerodynamicists discovered that the chines generated powerful vortices and created additional lift, leading to unexpected aerodynamic performance improvements.[32] The angle of incidence of the delta wings could then be reduced for greater stability and less drag at high speeds; more weight, such as fuel, could be carried to increase range. Landing speeds were also reduced, since the chines' vortices created turbulent flow over the wings at high angles of attack, making it harder for the wings to stall. High-alpha turns were limited by the capability of the engine inlets to ingest air, possibly resulting in flameout.[33] Pilots were thus warned not to pull more than 3 g and to avoid high angles of attack. The chines also acted like the leading-edge extensions that increase the agility of modern fighters such as the F-5, F-16, F/A-18, MiG-29 and Su-27. The addition of chines also enabled the removal of the planned canard foreplanes.[N 4][34][35]

Air inlets

Operation of the air inlets and air flow patterns through the J58
The air inlets allowed the SR-71 to cruise at over Mach 3.2 while keeping airflow into the engines at the initial subsonic speeds. At the front of each inlet, a pointed, movable cone called a "spike" was locked in its full forward position on the ground and during subsonic flight. When the aircraft accelerated past Mach 1.6, an internal jackscrew withdrew the spike up to 26 inches (66 cm) inwards,[36] directed by an analog air inlet computer that took into account pitot-static, pitch, roll, yaw, and angle of attack. Moving the spike tip drew the shock wave riding on it closer to the inlet cowling until it touched just slightly inside the cowling lip. This position reflected the spike shock-wave repeatedly between the spike centerbody and the inlet inner cowl sides, and minimized shock-wave spillage, which caused turbulence over the outer nacelle and wing. This maintained shock pressures while slowing the air to form a Mach 1 shock wave in front of the engine compressor.[37]
The backside of this "normal" shock wave is subsonic air for ingestion into the engine compressor. This capture of the Mach 1 shock wave within the inlet is called "Starting the Inlet". Tremendous pressures would be built up inside the inlet and in front of the compressor face. Bleed tubes and bypass doors were designed into the inlet and engine nacelles to handle some of this pressure and to position the final shock to allow the inlet to remain "started". Air compressed by the inlet/shockwave interaction was diverted directly into the afterburner to be mixed and burned. This configuration is essentially a ramjet and provides up to 70% of the aircraft's thrust at higher Mach numbers.[citation needed] Ben Rich, who designed the inlets at Skunk Works, often referred to the engine compressors as "pumps to keep the inlets alive"; he sized the inlets for Mach 3.2 cruise, the aircraft's most efficient speed.[25] The additional thrust refers to the reduction of engine power required to compress the airflow; the SR-71 was more fuel-efficient at higher speeds, in terms of pounds burned per nautical mile traveled. During one mission, SR-71 pilot Brian Shul flew faster than usual for some time to avoid multiple interception attempts; afterwards, it was discovered that this had reduced fuel consumption.[38]
In the early years of operation, the analog computers would not always keep up with rapidly changing flight environmental inputs. If internal pressures became too great and the spike was incorrectly positioned, the shock wave would suddenly blow out the front of the inlet, called an "Inlet Unstart." During an unstart, air flow through the engine compressor immediately stopped, thrust dropped, and exhaust gas temperatures rose. The remaining engine's asymmetrical thrust would cause the aircraft to yaw violently to one side. SAS, autopilot, and manual control inputs would fight the yawing, but often the extreme off-angle would reduce airflow in the opposite engine and stimulate "sympathetic stalls". This generated a rapid counter-yawing, often coupled with loud "banging" noises, and a rough ride during which crews' helmets would sometimes strike their cockpit canopies.[39] One response to a single unstart was unstarting both inlets to prevent yawing, then restarting them both.[40] Lockheed later installed an electronic control to detect unstart conditions and perform this reset action without pilot intervention.[41] Beginning in 1980, the analog inlet control system was replaced by a digital system, which reduced unstart instances.[42]

Engines

SR-71 Blackbird engine on display at the Battleship Memorial Park
The SR-71's Pratt & Whitney J58-P4 engine was a considerable innovation of the era; the engine could produce a static thrust of 32,500 lbf (145 kN).[43] The J58 was most efficient around Mach 3.2,[44] the Blackbird's typical cruising speed. A unique hybrid, the engine can be thought of as a turbojet inside a ramjet. At lower speeds, the turbojet provided most of the compression and most of the energy from fuel combustion. At higher speeds, the turbojet largely ceased to provide thrust; instead, air was compressed by the shock cones and fuel burned in the afterburner.[43]
In detail, air was initially compressed (and thus also heated) by the shock cones, which generated shock waves that slowed the air down to subsonic speeds relative to the engine. The air then passed through four compressor stages and was split by movable vanes: some of the air entered the compressor fans ("core-flow" air), while the rest of the air went straight to the afterburner (via six bypass tubes). The air traveling through the turbojet was further compressed (and further heated), and then fuel was added to it in the combustion chamber: it then reached the maximum temperature anywhere in the Blackbird, just low enough to keep the turbine blades from softening. After passing through the turbine (and thus being cooled somewhat), the core-flow air went through the afterburner and met with any bypass air.[citation needed]
Around Mach 3, the increased heating from the shock cone compression, plus the heating from the compressor fans, was enough to get the core air to high temperatures, and little fuel could be added in the combustion chamber without melting the turbine blades. This meant the whole compressor-combustor-turbine set-up in the core of the engine provided less power, and the Blackbird flew predominantly on air bypassed straight to the afterburners, forming a large ramjet effect.[25][45][46] The maximum speed was limited by the specific maximum temperature for the compressor inlet of 800 °F (427 °C). 1990s studies of inlets of this type indicated that newer technology could allow for inlet speeds with a lower limit of Mach 6.[47]
AG330 start cart, Hill Aerospace Museum
Originally, the Blackbird's engines started up with the assistance of an external engine referred to as a "start cart". The cart included two Buick Wildcat V8 engines positioned underneath the aircraft. The two engines powered a single, vertical driveshaft connecting to a single J58 engine. Once one engine was started, the cart was wheeled to the other side of the aircraft to start the other engine. The operation was deafening. Later, big-block Chevrolet engines were used. Eventually, a quieter, pneumatic start system was developed for use at Blackbird main operating bases, but the start carts remained to support recovery team Blackbird starts at diversion landing sites not equipped to start J-58 engines.[48]

Fuel

Several exotic fuels were investigated for the Blackbird. Development began on a coal slurry powerplant, but Johnson determined that the coal particles damaged important engine components.[25] Research was conducted on a liquid hydrogen powerplant, but the tanks for storing cryogenic hydrogen were not of a suitable size or shape.[25] In practice, the Blackbird would burn somewhat conventional JP-7 which was difficult to light. To start the engines, triethylborane (TEB), which ignites on contact with air, was injected to produce temperatures high enough to ignite the JP-7. The TEB produced a characteristic green flame, which could often be seen during engine ignition.[38]

Astro-Inertial Navigation System

The USAF sought a precision navigation system for maintaining route accuracy and target tracking at very high speeds, superior to the inertial navigation systems used by the preceding U-2 and A-12.[citation needed] Nortronics, Northrop's electronics development division, had developed an astro-inertial navigation system (ANS), which could correct navigation errors with celestial observations, for the SM-62 Snark missile, and a separate system for the ill-fated AGM-48 Skybolt missile, the latter of which was adapted for the SR-71.[citation needed]
Before each takeoff, a primary alignment brought the ANS's inertial components to a high degree of accuracy. Once in flight, the ANS, which sat behind the Reconnaissance Systems Officer (RSO)'s position, tracked stars through a circular window set in the upper fuselage.[38] Its "blue light" source star tracker, which could see stars during both day and night, would continuously track a variety of stars as the aircraft's changing position brought them into view. The system's digital computer ephemeris contained data on 56 (later 61) stars.[49] The ANS could supply altitude and position to flight controls and other systems, including the Mission Data Recorder, Auto-Nav steering to preset destination points, automatic pointing and control of cameras and sensors, and optical or SLR sighting of fix points loaded into the ANS before takeoff.[50]

Sensors and payloads

The SR-71 Defensive System B
The SR-71 originally included optical/infrared imagery systems; side-looking airborne radar (SLAR); electronic intelligence (ELINT) gathering systems; defensive systems for countering missile and airborne fighters; and recorders for SLAR, ELINT and maintenance data.[citation needed] The SR-71 carried a Fairchild tracking camera and an HRB Singer infrared camera, both of which ran during the entire mission for route documentation, to respond to any accusations of overflight.[citation needed]
Because the SR-71 carried an observer behind the pilot, it could not use the A-12's principal sensor, a single large-focal-length optical camera that sat in the "Q-Bay" behind the cockpit. Instead, camera systems could be located either in the wing chines or the aircraft's interchangeable nose. Wide-area imaging was provided by two of Itek's Operational Objective Cameras (OOCs), which provided stereo imagery across the width of the flight track, or an Itek Optical Bar Camera (OBC), which gave continuous horizon-to horizon coverage. A closer view of the target area was given by the HYCON Technical Objective Camera (TEOC), that could be directed up to 45 degrees left or right of the centerline.[51] Initially, the TEOCs could not match the resolution of the A-12's larger camera, but rapid improvements in both the camera and film improved this performance.[51][52]
Side-looking radar, built by Goodyear Aerospace, could be carried in the removable nose. In later life, the radar was replaced by Loral's Advanced Synthetic Aperture Radar System (ASARS-1). Both the first SLR and ASARS-1 were ground-mapping imaging systems, collecting data either in fixed swaths left or right of centerline or from a spot location for higher resolution.[51] ELINT-gathering systems, called the Electro Magnetic Reconnaissance System (EMR), built by AIL could be carried in the chine bays to analyse electronic signal fields being passed through, and were pre-programmed to identify items of interest.[51][53]
Over its operational life, the Blackbird carried various electronic countermeasures, including warning and active electronic systems built by several ECM companies and called Systems A, A2, A2C, B, C, C2, E, G, H and M. On a given mission, an aircraft would carry several of these frequency/purpose payloads to meet the expected threats.[citation needed] After landing, recording systems and gathered information from the SLR and ELINT systems, and the Maintenance Data Recorder (MDR) were subjected to post-flight ground analysis. In the later years of its operational life, a data-link system could send ASARS-1 and ELINT data from about 2,000 nmi (3,700 km) of track coverage to a suitably equipped ground station.[citation needed]

Life support

SR-71 pilot in full flight suit
Flying at 80,000 ft (24,000 m) meant that crews could not use standard masks, which could not provide enough oxygen above 43,000 ft (13,000 m). Specialized protective pressurized suits were produced by the David Clark Company for the A-12, YF-12, M-21 and SR-71. Furthermore, an emergency ejection at Mach 3.2 would subject crews to an instant heat rise of about 450 °F (230 °C); thus, during a high altitude ejection scenario, an onboard oxygen supply would keep the suit pressurized during the descent.[citation needed]
The cockpit could be pressurized to an altitude of 10,000 ft (3,000 m) or 26,000 ft (7,900 m) during flight.[54] The cabin needed a heavy-duty cooling system, for cruising at Mach 3.2 would heat the aircraft's external surface well beyond 500 °F (260 °C)[55] and the inside of the windshield to 250 °F (120 °C). An air conditioner used a heat exchanger to dump heat from the cockpit into the fuel prior to combustion.[citation needed]

Operational history

KC-135 and SR-71 during an "in-flight" re-fueling
An SR-71 refueling from a KC-135Q Stratotanker during a flight in 1983
The first flight of an SR-71 took place on 22 December 1964, at Air Force Plant 42 in Palmdale, California.[56] The SR-71 reportedly reached a top speed of Mach 3.4 during flight testing.[57][verification needed] The first SR-71 to enter service was delivered to the 4200th (later, 9th) Strategic Reconnaissance Wing at Beale Air Force Base, California, in January 1966.[58]
SR-71s first arrived at the 9th SRW's Operating Location (OL-8) at Kadena Air Base, Okinawa on 8 March 1968.[59] These deployments were code named "Glowing Heat", while the program as a whole was code named "Senior Crown". Reconnaissance missions over North Vietnam were code named "Giant Scale". On 21 March 1968, Major (later General) Jerome F. O'Malley and Major Edward D. Payne flew the first operational SR-71 sortie in SR-71 serial number 61-7976 from Kadena AB, Okinawa.[59] During its career, this aircraft (976) accumulated 2,981 flying hours and flew 942 total sorties (more than any other SR-71), including 257 operational missions, from Beale AFB; Palmdale, California; Kadena Air Base, Okinawa, Japan; and RAF Mildenhall, UK. The aircraft was flown to the National Museum of the United States Air Force near Dayton, Ohio in March 1990.
From the beginning of the Blackbird's reconnaissance missions over enemy territory (North Vietnam, Laos, etc.) in 1968, the SR-71s averaged approximately one sortie a week for nearly two years. By 1970, the SR-71s were averaging two sorties per week, and by 1972, they were flying nearly one sortie every day. Two SR-71s were lost during these missions, one in 1970 and the second aircraft in 1972, both due to mechanical malfunctions.[60][61]
Early project Habu logo
While deployed in Okinawa, the SR-71s and their aircrew members gained the nickname Habu (as did the A-12s preceding them) after a pit viper indigenous to Japan, which the Okinawans thought the plane resembled.[5]
Swedish Air Force fighter pilots, using the predictable patterns of SR-71 routine flights over the Baltic Sea, managed to lock their radar on the SR-71 on numerous occasions. Despite heavy jamming from the SR-71, target illumination was maintained by feeding target location from ground-based radars to the fire-control computer in the JA 37 Viggen interceptor.[62] The most common site for the lock-on to occur was the thin stretch of international airspace between Öland and Gotland that the SR-71 used on the return flight.[63][64][65]
Operational highlights for the entire Blackbird family (YF-12, A-12, and SR-71) as of about 1990 included:[66]
  • 3,551 Mission Sorties Flown
  • 17,300 Total Sorties Flown
  • 11,008 Mission Flight Hours
  • 53,490 Total Flight Hours
  • 2,752 hours Mach 3 Time (Missions)
  • 11,675 hours Mach 3 Time (Total)
Only one crew member, Jim Zwayer, a Lockheed flight-test reconnaissance and navigation systems specialist, was killed in a flight accident.[67] The rest of the crew members ejected safely or evacuated their aircraft on the ground.

Initial retirement

In the 1970s, the SR-71 was placed under closer Congressional scrutiny and, with budget concerns, the program was soon under attack. Both Congress and the USAF sought to focus on newer projects like the B-1 Lancer and upgrades to the B-52 Stratofortress, whose replacement was being developed.
The SR-71 had never gathered significant supporters within the Air Force, making it an easy target for cost-conscious politicians. Also, parts were no longer being manufactured for the aircraft, so other airframes had to be cannibalized to keep the fleet airworthy. The aircraft's lack of a datalink (unlike the Lockheed U-2) meant that imagery and radar data could not be used in real time, but had to wait until the aircraft returned to base. The Air Force saw the SR-71 as a bargaining chip which could be sacrificed to ensure the survival of other priorities. A general misunderstanding of the nature of aerial reconnaissance and a lack of knowledge about the SR-71 in particular (due to its secretive development and usage) was used by detractors to discredit the aircraft, with the assurance given that a replacement was under development. In 1988, Congress was convinced to allocate $160,000 to keep six SR-71s (along with a trainer model) in flyable storage that would allow the fleet to become airborne within 60 days. The USAF refused to spend the money. While the SR-71 survived attempts to retire it in 1988, partly due to the unmatched ability to provide high-quality coverage of the Kola Peninsula for the US Navy,[68] the decision to retire the SR-71 from active duty came in 1989, with the SR-71 flying its last missions in October that year.[69]
Funds were redirected to the financially troubled B-1 Lancer and B-2 Spirit programs. Four months after the plane's retirement, General Norman Schwarzkopf, Jr., was told that the expedited reconnaissance which the SR-71 could have provided was unavailable during Operation Desert Storm.[70]

Reactivation

Due to increasing unease about political conditions in the Middle East and North Korea, the U.S. Congress re-examined the SR-71 beginning in 1993.[70] At a hearing of the Senate Committee on Armed Services, Senator J. James Exon asked Admiral Richard C. Macke:
If we have the satellite intelligence that you collectively would like us to have, would that type of system eliminate the need for an SR-71… Or even if we had this blanket up there that you would like in satellites, do we still need an SR-71?
Macke replied,
From the operator's perspective, what I need is something that will not give me just a spot in time but will give me a track of what is happening. When we are trying to find out if the Serbs are taking arms, moving tanks or artillery into Bosnia, we can get a picture of them stacked up on the Serbian side of the bridge. We do not know whether they then went on to move across that bridge. We need the [data] that a tactical, an SR-71, a U-2, or an unmanned vehicle of some sort, will give us, in addition to, not in replacement of, the ability of the satellites to go around and check not only that spot but a lot of other spots around the world for us. It is the integration of strategic and tactical."[71]
Rear Admiral Thomas F. Hall addressed the question of why the SR-71 was retired, saying it was under "the belief that, given the time delay associated with mounting a mission, conducting a reconnaissance, retrieving the data, processing it, and getting it out to a field commander, that you had a problem in timeliness that was not going to meet the tactical requirements on the modern battlefield. And the determination was that if one could take advantage of technology and develop a system that could get that data back real time… that would be able to meet the unique requirements of the tactical commander." Hall stated that "the Advanced Airborne Reconnaissance System, which was going to be an unmanned UAV" would meet the requirements but was not affordable at the time. He said that they were "looking at alternative means of doing [the job of the SR-71]."[71]
Macke told the committee that they were "flying U-2s, RC-135s, [and] other strategic and tactical assets" to collect information in some areas.[71] Senator Robert Byrd and other Senators complained that the "better than" successor to the SR-71 had yet to be developed at the cost of the "good enough" serviceable aircraft. They maintained that, in a time of constrained military budgets, designing, building, and testing an aircraft with the same capabilities as the SR-71 would be impossible.[66]
Congress' disappointment with the lack of a suitable replacement for the Blackbird was cited concerning whether to continue funding imaging sensors on the U-2. Congressional conferees stated the "experience with the SR-71 serves as a reminder of the pitfalls of failing to keep existing systems up-to-date and capable in the hope of acquiring other capabilities."[66] It was agreed to add $100 million to the budget to return three SR-71s to service, but it was emphasized that this "would not prejudice support for long-endurance UAVs [such as the Global Hawk]." The funding was later cut to $72.5 million.[66] The Skunk Works was able to return the aircraft to service under budget, coming in at $72 million.[72]
Colonel Jay Murphy (USAF Retired) was made the Program Manager for Lockheed's reactivation plans. Retired Air Force Colonels Don Emmons and Barry MacKean were put under government contract to remake the plane's logistic and support structure. Still-active Air Force pilots and Reconnaissance Systems Officers (RSOs) who had worked with the aircraft were asked to volunteer to fly the reactivated planes. The aircraft was under the command and control of the 9th Reconnaissance Wing at Beale Air Force Base and flew out of a renovated hangar at Edwards Air Force Base. Modifications were made to provide a data-link with "near real-time" transmission of the Advanced Synthetic Aperture Radar's imagery to sites on the ground.[66]

Final retirement

The reactivation met much resistance: the Air Force had not budgeted for the aircraft, and UAV developers worried that their programs would suffer if money was shifted to support the SR-71s. Also, with the allocation requiring yearly reaffirmation by Congress, long-term planning for the SR-71 was difficult.[66] In 1996, the Air Force claimed that specific funding had not been authorized, and moved to ground the program. Congress reauthorized the funds, but, in October 1997, President Bill Clinton attempted to use the line-item veto to cancel the $39 million allocated for the SR-71. In June 1998, the Supreme Court of the United States ruled that the line-item veto was unconstitutional. All this left the SR-71's status uncertain until September 1998, when the Air Force called for the funds to be redistributed. The plane was permanently retired in 1998. The Air Force quickly disposed of its SR-71s, leaving NASA with the two last airworthy Blackbirds until 1999.[73] All other Blackbirds have been moved to museums except for the two SR-71s and a few D-21 drones retained by the NASA Dryden Flight Research Center.[72]

SR-71 timeline

Important dates pulled from many sources.[74][unreliable source?]
  • 24 December 1957: First J58 engine run.
  • 1 May 1960: Francis Gary Powers is shot down in a Lockheed U-2 over the Soviet Union.
  • 13 June 1962: SR-71 mock-up reviewed by Air Force.
  • 30 July 1962: J58 completes pre-flight testing.
  • 28 December 1962: Lockheed signs contract to build six SR-71 aircraft.
  • 25 July 1964: President Johnson makes public announcement of SR-71.
  • 29 October 1964: SR-71 prototype (AF Ser. No. 61-7950) delivered to Air Force Plant 42 at Palmdale, CA.
  • 7 December 1964: Beale AFB, CA, announced as base for SR-71.
  • 22 December 1964: First flight of the SR-71 with Lockheed test pilot Bob Gilliland at Air Force Plant #42.
  • 21 July 1967: Jim Watkins and Dave Dempster fly first international sortie in SR-71A, AF Ser. No. 61-7972, when the Astro-Inertial Navigation System (ANS) fails on a training mission and they accidentally fly into Mexican airspace.
  • 3 November 1967: A-12 and SR-71 conduct a reconnaissance fly-off. Results are questionable.
  • 5 February 1968: Lockheed ordered to destroy A-12, YF-12, and SR-71 tooling.
  • 8 March 1968: First SR-71A (AF Ser. No. 61-7978) arrives at Kadena AB, Okinawa to replace A-12s.
  • 21 March 1968: First SR-71 (AF Ser. No. 61-7976) operational mission flown from Kadena AB over Vietnam.
  • 29 May 1968: CMSgt Bill Gornik begins the tie-cutting tradition of Habu crews' neckties.
  • 3 December 1975: First flight of SR-71A (AF Ser. No. 61-7959) in "Big Tail" configuration.
  • 20 April 1976: TDY operations started at RAF Mildenhall, United Kingdom with SR-71A, AF Ser. No. 61-7972.
  • 27–28 July 1976 : SR-71A sets speed and altitude records (Altitude in Horizontal Flight: 85,068.997 ft (25,929.030 m) and Speed Over a Straight Course: 2,193.167 miles per hour (3,529.560 km/h)).
  • August 1980: Honeywell starts conversion of AFICS to DAFICS.
  • 15 January 1982: SR-71B, AF Ser. No. 61-7956, flies its 1,000th sortie.
  • 21 April 1989: SR-71, AF Ser. No. 61-7974, is lost due to an engine explosion after taking off from Kadena AB. This is the last Blackbird to be lost, and is the first SR-71 accident in 17 years.[3][4]
  • 22 November 1989: Air Force SR-71 program officially terminated.
  • 21 January 1990: Last SR-71, AF Ser. No. 61-7962, leaves Kadena AB.
  • 26 January 1990: SR-71 is decommissioned at Beale AFB, CA.
  • 6 March 1990: Last SR-71 flight under SENIOR CROWN program, setting four speed records en route to Smithsonian Institution.
  • 25 July 1991: SR-71B, AF Ser. No. 61-7956/NASA #831 officially delivered to NASA Dryden Flight Research Center at Edwards AFB, CA.
  • October 1991: NASA engineer Marta Bohn-Meyer becomes the first female SR-71 crew member.
  • 28 September 1994: Congress votes to allocate $100 million for reactivation of three SR-71s.
  • 26 April 1995: First reactivated SR-71A (AF Ser. No. 61-7971) makes its first flight after restoration by Lockheed.
  • 28 June 1995: First reactivated SR-71 returns to Air Force as Detachment 2.
  • 28 August 1995: Second reactivated SR-71A (AF Ser. No. 61-7967) makes first flight after restoration.
  • 2 August 1997: A NASA SR-71 makes multiple flybys at the EAA AirVenture Oshkosh air show. It is then supposed to perform a sonic boom at 53,000 feet (16,000 m) after a midair refueling, but a fuel flow problem causes it to divert to Milwaukee. Two weeks later, the pilot's flight path brings him over Oshkosh again, and there is, in fact, a sonic boom.
  • 19 October 1997: The last flight of SR-71B, AF Ser. No. 61-7956 at Edwards AFB Open House.
  • 9 October 1999: The last flight of the SR-71 (AF Ser. No. 61-7980/NASA 844).
  • September 2002: Final resting places of aircraft #956, #971, and #980 are made known.[75]
  • 15 December 2003: SR-71, AF Ser. No. 61-7972, goes on display at the Smithsonian National Air and Space Museum's Steven F. Udvar-Hazy Center at Washington Dulles International Airport in Chantilly, Virginia.

Records

View from the cockpit at 73,000 feet (22,000 m) over the Atlantic Ocean.[76]
The SR-71 was the world's fastest and highest-flying operational manned aircraft throughout its career. On 28 July 1976, SR-71 serial number 61-7962, broke the world record: an "absolute altitude record" of 85,069 feet (25,929 m).[8][77][78][79] Several aircraft exceeded this altitude in zoom climbs but not in sustained flight.[8] That same day SR-71, serial number 61-7958 set an absolute speed record of 1,905.81 knots (2,193.2 mph; 3,529.6 km/h), approximately mach 3.3.[8][79]
The SR-71 also holds the "Speed Over a Recognized Course" record for flying from New York to London—distance 3,508 miles (5,646 km), 1,435.587 miles per hour (2,310.353 km/h), and an elapsed time of 1 hour 54 minutes and 56.4 seconds—set on 1 September 1974 while flown by U.S. Air Force Pilot Maj. James V. Sullivan and Maj. Noel F. Widdifield, reconnaissance systems officer (RSO).[80] This equates to an average velocity of about Mach 2.68, including deceleration for in-flight refueling. Peak speeds during this flight were probably closer to the declassified top speed of Mach 3.2+. For comparison, the best commercial Concorde flight time was 2 hours 52 minutes, and the Boeing 747 averages 6 hours 15 minutes.
On 26 April 1971, 61-7968 flown by Majors Thomas B. Estes and Dewain C. Vick flew over 15,000 miles (24,000 km) in 10 hrs. 30 min. This flight was awarded the 1971 Mackay Trophy for the "most meritorious flight of the year" and the 1972 Harmon Trophy for "most outstanding international achievement in the art/science of aeronautics".[81]
The "Last Flight" of a SR-71. In background SR-71 S/N 61-7972. Foreground Pilot Lt.Col. Raymond E. "Ed" Yielding and RSO Lt.Col. Joseph T. "JT" Vida, 6 March 1990.
Pilot and RSO on 6 March 1990, the last SR-71 Senior Crown flight
When the SR-71 was retired in 1990, one Blackbird was flown from its birthplace at United States Air Force Plant 42 in Palmdale, California, to go on exhibit at what is now the Smithsonian Institution's Steven F. Udvar-Hazy Center in Chantilly, Virginia.[82] On 6 March 1990, Lt. Col. Raymond E. "Ed" Yielding and Lt. Col. Joseph T. "JT" Vida piloted SR-71 S/N 61-7972 on its final Senior Crown flight and set four new speed records in the process.
  1. Los Angeles, CA, to Washington, D.C., distance 2,299.7 miles (3,701.0 km), average speed 2,144.8 miles per hour (3,451.7 km/h), and an elapsed time of 64 minutes 20 seconds.[80]
  2. West Coast to East Coast, distance 2,404 miles (3,869 km), average speed 2,124.5 miles per hour (3,419.1 km/h), and an elapsed time of 67 minutes 54 seconds.
  3. Kansas City, Missouri, to Washington, D.C., distance 942 miles (1,516 km), average speed 2,176 miles per hour (3,502 km/h), and an elapsed time of 25 minutes 59 seconds.
  4. St. Louis, Missouri, to Cincinnati, Ohio, distance 311.4 miles (501.1 km), average speed 2,189.9 miles per hour (3,524.3 km/h), and an elapsed time of 8 minutes 32 seconds.
These four speed records were accepted by the National Aeronautic Association (NAA), the recognized body for aviation records in the United States.[83] After the Los Angeles–Washington flight, Senator John Glenn addressed the United States Senate, chastening the Department of Defense for not using the SR-71 to its full potential:
Mr. President, the termination of the SR-71 was a grave mistake and could place our nation at a serious disadvantage in the event of a future crisis. Yesterday's historic transcontinental flight was a sad memorial to our short-sighted policy in strategic aerial reconnaissance.

Successor

Much speculation existed regarding a replacement for the SR-71, most notably the rumored aircraft codenamed Aurora. This is due to limitations of spy satellites, which are governed by the laws of orbital mechanics. It may take up to 24 hours before a satellite is in proper orbit to photograph a particular target, far longer than a reconnaissance plane. Spy planes can provide the most current intelligence information and collect it when lighting conditions are optimum. The fly-over orbit of spy satellites may also be predicted and can allow the enemy to hide assets when they know the satellite is above, a drawback spy planes do not exhibit. These factors have led many to doubt that the US has abandoned the concept of spy planes to complement reconnaissance satellites.[84] Unmanned aerial vehicles (UAVs) are also used for much aerial reconnaissance in the 2000s. They have the advantage of being able to overfly hostile territory without putting human pilots at risk.
On 1 November 2013, media outlets report that Skunk Works has been working on the SR-72, which would fly twice as fast at Mach 6.[85][86]

Variants

  • SR-71A was the main production variant.
  • SR-71B was a trainer variant.[87]
  • SR-71C was a hybrid aircraft composed of the rear fuselage of the first YF-12A (S/N 60-6934) and the forward fuselage from an SR-71 static test unit. The YF-12 had been wrecked in a 1966 landing accident. This Blackbird was seemingly not quite straight and had a yaw at supersonic speeds.[88] It was nicknamed "The Bastard".[89][90]

Accidents and aircraft disposition

SR-71 at Pima Air & Space Museum, Tucson, Arizona
Close-up of the SR-71B operated by NASA’s Dryden Flight Research Center, Edwards AFB, California
The SR-71A on display at the Boeing Aviation Hangar (Steven F. Udvar-Hazy Center).
Twelve SR-71s were lost and one pilot died in accidents during the aircraft's service career.[3][4] Eleven of these accidents happened between 1966 and 1972.
List of SR-71 Blackbirds
AF Serial Number Model Location or fate
61-7950 SR-71A Lost, 10 January 1967
61-7951 SR-71A Pima Air & Space Museum (adjacent to Davis-Monthan Air Force Base), Tucson, Arizona
61-7952 SR-71A Lost, 25 January 1966[67]
61-7953 SR-71A Lost, 18 December 1969[91]
61-7954 SR-71A Lost, 11 April 1969
61-7955 SR-71A Air Force Flight Test Center Museum, Edwards Air Force Base, California[92]
61-7956 SR-71B Air Zoo, Kalamazoo, Michigan
61-7957 SR-71B Lost, 11 January 1968
61-7958 SR-71A Museum of Aviation, Robins Air Force Base, Warner Robins, Georgia
61-7959 SR-71A Air Force Armament Museum, Eglin Air Force Base, Florida[93]
61-7960 SR-71A Castle Air Museum at the former Castle Air Force Base, Atwater, California
61-7961 SR-71A Kansas Cosmosphere and Space Center, Hutchinson, Kansas
61-7962 SR-71A American Air Museum in Britain, Imperial War Museum Duxford, Cambridgeshire, England[94]
61-7963 SR-71A Beale Air Force Base, Marysville, California
61-7964 SR-71A Strategic Air and Space Museum (west of Offutt Air Force Base), Ashland, Nebraska
61-7965 SR-71A Lost, 25 October 1967
61-7966 SR-71A Lost, 13 April 1967
61-7967 SR-71A Barksdale Air Force Base, Bossier City, Louisiana
61-7968 SR-71A Virginia Aviation Museum, Richmond, Virginia
61-7969 SR-71A Lost, 10 May 1970
61-7970 SR-71A Lost, 17 June 1970
61-7971 SR-71A Evergreen Aviation Museum, McMinnville, Oregon
61-7972 SR-71A Steven F. Udvar-Hazy Center, Washington Dulles International Airport, Chantilly, Virginia
61-7973 SR-71A Blackbird Airpark, Air Force Plant 42, Palmdale, California
61-7974 SR-71A Lost, 21 April 1989
61-7975 SR-71A March Field Air Museum, March Air Reserve Base (former March AFB), Riverside, California[95]
61-7976 SR-71A National Museum of the United States Air Force, Wright-Patterson Air Force Base, near Dayton, Ohio
61-7977 SR-71A Lost, 10 October 1968. Cockpit section survived and located at the Seattle Museum of Flight.
61-7978 SR-71A Lost, 20 July 1972[3]
61-7979 SR-71A Lackland Air Force Base, San Antonio, Texas
61-7980 SR-71A Dryden Flight Research Center, Edwards Air Force Base, California
61-7981 SR-71C Hill Aerospace Museum, Hill Air Force Base, Ogden, Utah (formerly YF-12A 60-6934)
Notes: Many secondary references use apparently incorrect 64- series aircraft serial numbers (e.g. SR-71C 64-17981), but no primary government documents have been found to support this.[96]
After completion of all USAF and NASA SR-71 operations at Edwards AFB, the SR-71 Flight Simulator was moved in July 2006 to the Frontiers of Flight Museum at Love Field Airport in Dallas, Texas.[97]

Specifications (SR-71A)

Orthographically projected diagram of the SR-71A Blackbird.
Data from SR-71.org,[98] Pace[99]
General characteristics
Performance

See also

Portal icon United States Air Force portal
Portal icon Aviation portal
Related development
Aircraft of comparable role, configuration and era
Related lists
Posted by at
Labels: , , , , , , , , , , ,

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)